Plastic Cure Brush On 1/2 OzInsta-Cure CA 1 0Z
Insta-Cure Gap 1/2 Oz
Bob Smith 106 Gap Filing Insta Cure 1/2oz Cyanoacrylate Super Glue
INSTA-CURE is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Ask a question about this product